SN65 mm Series Indoor fire hydrant

• Type: Indoor Fire Hydrant
• Decompression: Normal Fire Hydrant
• Rotation: Ordinary Bolt
• Outdoor Fire Hydrant Type: Low Fire Hydrant
• Norminal Diameter: 1′′,2′′.2.5′′
• Connecting Type: Male and Female Type
• Model NO.: SN50/SN65
• Trademark: xl, gw
• Origin: China
• HS Code: 8481804090
• Production Capacity: 100, 000 PCS / Month

Product Description

Min.Order Quantity:	10 Piece/Pieces
Supply Ability:	2000 Piece/Pieces per Day
Port:	xiamen
Payment Terms:	L/C,T/T,Western Union

 
Quick Details
Place of Origin: Fujian, China (Mainland)
Brand Name: GW
Item:SNJ65
Model Number: SN50/SN65
Hydrant Valve Material:Brass,Bronze
Connecting Type: Male and Female type
Rated Working Pressure:16Bar
Strength Test Pressure:24Bar

Packaging & Delivery

Packaging Details:	4pcs/carton
Delivery Detail:	depends on the oeder quantity

 
indoor fire hydrant
Indoor fire hydrants valve called fire plug in USA is a connector to fire water supply with the valve interface,  used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire extinguishment.
 
A fire hydrant (also known colloquially as a fire plug in the United States or as a johnny pump in New York City, because the firemen of the late 19th century were called Johnnies ), is an active fire protection measure, and a source of water provided in most urban, suburban and rural areas with municipal water service to enable firefighters to tap into the municipal water supply to assist in extinguishing a fire.

Operation
A hose is attached to the fire hydrant, then the valve is opened to provide a powerful flow of water, on the order of 350 kPa (50 lbf/in²) (this pressure varies according to region and depends on various factors including the size and location of the attached water main). This hose can be further attached to a fire engine, which can then use a powerful pump to boost the water pressure and possibly split it into multiple streams. The hose may be connected with a threaded connection or a Storz connector. Care should be taken not to open or close a fire hydrant too quickly, as this can create a water hammer which can damage nearby pipes and equipment. The water inside a charged hoseline causes it to be very heavy and high water pressure causes it to be stiff and unable to make a tight turn while pressurized. When a fire hydrant is unobstructed, this is not a problem, as there is enough room to adequately position the hose.
 
Product name: Double valves and double outlets indoor fire hydrant with decompression and steady pressure
Model: SNSSW65-I-A-F
Material: made of cast iron.
Inlet interface: 65 mm / 2.5 inch
Intake type: cylindrical pipe female thread
Intake Diameter: G3
Outlet type: cylindrical pipe male thread with duct buckle
Outlet Diameter: 65 mm / 2.5 inch
Rated working pressure: 1.6 Mpa
Height of valve opening: 23 mm
For water and foam mixed liquid only
Standard: certification: ISO9001 in accordance with GB3445 china national standard

Model	Nominal Diameter     (mm)	Nominal Working  Pressure(Mpa)	Outlet	Adjustable Height f ≥
SN50	50	1.6	50	17
SN65	65		65	22
SN65-50	65		50	17
SN80-65	80		65	27
SNSS80-65	80		65	27

 
 

Item Model	Nominal Diameter (mm)	Nominal Pressure (Mpa)	Water Inlet		Water Outlet	Open Height F≥	External Dimentsion (L×W×H)(mm)
			Type	Bore
SN50	50	1.6	Pillar Pipe Thread	G2	50	17	158×100×190
SN65	65			G2 1/2	65	22	175×114×205
SNS65-50	965			G2 1/2	50	17	210×180×205
SNS80-65	80			G3	65	27	175×114×225
SNSS80-65	80			G3	65	27	270×300×280